How to connect the lens s zoom module

Connecting a lens zoom module involves mounting the module, aligning gears, connecting power/control cables, and configuring the module via software or app.

Step 1: Check Lens Compatibility

Ensure your lens is compatible with the zoom module:

• Focus Control: Lens should have distance markings on the focus ring.
• Zoom Control: Lens should have focal length markings on the zoom ring.
• Gear Requirement: The lens must have built-in gears; if not, use the included lens gear provided with the module .

Step 2: Mount the Zoom Module

1. Insert the support rod into the slot beneath the camera plate and tighten it.
2. Slide the zoom module onto the rod.
3. Align the module's gear teeth with the lens gear.
4. Press the module against the lens and tighten the securing knob.
5. Plug in the module's connection cable to the controller or PC .

Step 3: Connect to Power and Control

• For motorized lenses like LensConnect, a single USB cable connects the lens to a PC for power and control. Use a shielded USB cable, maximum 5 meters, and optionally a USB extension if needed .
• For AF zoom lenses with RS422/RS485 control, connect the control lines according to the lens manual, ensuring proper DIP switch and termination resistor settings .

Step 4: Configure Zoom Settings

• Open the lens control software or app.
• Select Zoom Control mode.
• The module may detect zoom limits automatically and prompt you to input the current zoom level.
• Save zoom positions in Keypose Mode (per pose) or Point Mode (per point) for automated recall .
• Adjust sensitivity settings (Slow, Medium, Fast) in the app if available .

Step 5: Lens Mapping and Calibration

• If the lens is not listed in the software, add it manually or search the lens community for mapping data.
• Perform a calibration run to ensure the zoom module moves smoothly across the full range without slippage .

Step 6: Safety Precautions

• Do not look directly at the sun through the lens.
• Avoid bending, twisting, or damaging connection cables.
• Do not disassemble or modify the lens or module.
• Avoid placing the lens in direct sunlight when unattended, as concentrated light may cause fire . Following these steps ensures your lens zoom module is securely mounted, properly connected, and ready for precise motorized zoom control.